Home  »  Forum

Forum

Please consider registering
guest

Log In Register

Register | Lost password?
Search
Advanced Search
Advanced Search:

— Forum Scope —



— Match —



— Forum Options —




Wildcard usage:
*  matches any number of characters    %  matches exactly one character

Minimum search word length is 4 characters - maximum search word length is 84 characters

Topic RSS
Connect linestrings
February 29, 2012
3:07 pm
noe
Member
Forum Posts: 5
Member Since:
February 28, 2012
Offline
3

THANKS!!

 

I did it!!

But yes, I had one linestring which it was closed, and I wanted to smooth it. I used the "construct circular fillet" and it makes a smooth curve but this curve was an arc. So I had small pieces of arcs between the linestrings. With the tool you told me I could select as a piece. But now is a "complex chain" with arcs and linestrings, but does not matter, its ok.

 

Anyway, if you know another better method to do it, tell me! 

 

THANKS CALVIN!!

February 29, 2012
1:15 pm
Calvin and Hobbs
Admin
Forum Posts: 116
Member Since:
April 17, 2009
Offline
2

i got this answer from one of the techs here:

"I don't understand the question. If a linestring is in small pieces, the "Construct Circular Fillet" tool will only create a fillet that is geometrically and mathematically possible. For example, you cannot create a circular fillet with a 2" radius with 2 lines that are connected that are 1" long. MicroStation will reject it and say that it is an "illegal definition". Also, the "Construct Circular Fillet" tool does not break up existing linestrings into smaller pieces.

If the user wants to create one linestring from two connected linestrings, then he can use the "Create Complex Chain" tool. He will need to enable the "Simplify Geometry" option to make sure that the new element is a linestring.

Not sure if that helps."

February 29, 2012
9:36 am
noe
Member
Forum Posts: 5
Member Since:
February 28, 2012
Offline
1

Hello to everybody,

 

I am trying to smooth a linestring with the "construct circluar fillet" between vertex. When I use it, then the linestring is in many parts, (many as the number of time I use the tool "construct circular fillet").

I would like to know How could I match or connect this new linestring with the rest of linestring.

 

HElp??

 

THANKS!!!

Comments are closed.